Battery light on, a battery that keeps going flat, or a light bar and fridge to wire into a bakkie? These calculators and guides use the same rules of thumb auto electricians do, so you can see what is likely wrong or what an installation needs before you ask for a quote.
Calculators and guides
- LIGHTSDashboard Warning Lights GuideWhat each warning light means, how urgent it is and whether you can keep driving. Filter by colour.
- V DCBattery and Alternator Test CalculatorEnter resting, cranking and running voltages from a multimeter to see if the battery, starter or alternator is at fault.
- mm²12V / 24V Wire Size and Voltage Drop CalculatorThe cable size you need for a load, run length and voltage, and the voltage you lose along the way.
- AFuse and Relay Size CalculatorTurn watts into amps, pick the right fuse rating and blade fuse colour, and see whether you need a relay.
- AhDual Battery and Fridge Battery CalculatorSize an auxiliary battery for a fridge, lights and charging, and check whether your DC-DC charger and solar keep up.
- mAParasitic Battery Drain CalculatorHow many days a measured key-off drain takes to flatten your battery, and whether the drain is normal.
- hBattery Charging Time CalculatorHow long a charger takes to fill a car, deep cycle or lithium battery, and whether the charger is the right size.
Quick reference: 12 V numbers worth knowing
| Reading | Healthy range |
|---|---|
| Rested battery, fully charged | 12.6 V (AGM 12.8 V) |
| Rested battery, half charged | 12.2 V: charge it |
| Lowest voltage while cranking | Above 9.6 V |
| Charging voltage, engine running | 13.8–14.7 V (smart alternators 12.5–15 V) |
| Key-off parasitic drain | 20–50 mA after modules sleep |
| Voltage drop on a light or fridge circuit | Under 3% (0.36 V on 12 V) |
| Fuse rating | About 125% of the load, never above the cable's rating |
| 24 V trucks and buses | Double the voltages above |
Use a tool, then get a quote
The tools work out the same numbers an auto electrician starts with, so you can understand a fault or plan an installation before you ask for a price. They run in your browser; nothing you type into them is stored. When you're ready, send your readings or your plan through the quote form and an auto electrician or supplier in your area will contact you. For a fault you can't pin down, start with a diagnostic scan.